Products

DA55n

The use of a constant-bleed regulator improves pressure stability.

In combination with various barrels and metering valves, it can be used in a wide range of systems.

The 55N Series is a low-cost, popular controller.

  • With a discharge input signal holding circuit.
  • Discharge end signal output is standard equipment.
  • The solenoid valve high-speed operation circuit enables stable discharge from a small amount.
    ――By adopting a stainless steel chassis, it is resistant to dirt such as adhesives and can be kept clean forever.
  • From low viscosity materials such as water to high viscosity materials, it is possible to discharge from 0.0001cc/shot to any large amount.
  • By combining with a discharge valve, it can be used for a wide range of systems.
  • You can check the discharge by pressing the test switch on the panel.
Control method Pneumatic – Electronic Control
Pressure setting range 0.01 ~ 0.7MPa
power AC100V or AC200~240V±10% 50/60Hz
Power consumption 7VA or less (at 100V AC)
Mode of operation Timer mode (quantitative discharge)
Free mode (continuous discharge)
Switching
Timer 0.01~3sec. (analog setting)
Operating ability 400 times/min
External dimensions 180(W)×170(D)×81(H)mm
Weight 1.9kg
Vacuum mechanism
End of discharge signal (relay output) MAX 125V, MAX 1A, MAX 30VA
Standard Accessories Power cord, foot switch (FSO1) or metal outlet (MC1604P)

All Products

DA55n

Fill out the form below, and we will be in touch shortly.

DA55n

Fill out the form below, and Download Catalogues.