Products

DA77n Series

The use of a constant-bleed regulator improves pressure stability.

From low viscosity materials such as water to high viscosity materials, the dosing setting is possible from 0.0001cc/shot to any large amount.

In combination with various barrels and metering valves, it can be used in a wide range of systems.

The 77N Series combines a 4-digit digital timer with a precision regulator for highly accurate dispensing. In addition, the type with a built-in vacuum mechanism can adjust the dripping of low-viscosity materials.

With a discharge input signal holding circuit.
Discharge end signal output is standard equipment.
The solenoid valve high-speed operation circuit enables stable discharge from a small amount.
――By adopting a stainless steel chassis, it is resistant to dirt such as adhesives and can be kept clean forever.
By adopting a 0.001 second digital quartz timer, the timer setting repeatability is good and stable setting time can be obtained.
You can check the set time by displaying the discharge time. In free mode, the discharge time can be measured by the stopwatch function.
By equipping the test switch, the dispenser alone can check and adjust the discharge even when it is embedded in a dedicated machine.

Control method	Pneumatic – Electronic Control
Pressure setting range	0.01 ～ 0.7MPa
power	AC100V or AC200~240V±10% 50/60Hz
Power consumption	7VA or less (at 100V AC)
Mode of operation	Timer mode (quantitative discharge)
	Free mode (continuous discharge and time measurement)
	Switching
timer	0.001~9.999 sec (digital setting)
Timer time display	4-digit LED indication
Operating ability	400 times/min
External dimensions	161（W）×180（D）×120（H）mm
weight	2.3kg
Vacuum mechanism	－
End of discharge signal (relay output)	MAX 125V, MAX 1A, MAX 30VA
Standard Accessories	Power cord, foot switch (FSO1) or metal outlet (MC1604P)