Products

H Series Electrolyte Compatible Type Wet Cup Specification [Motor Driven]

This is an electrolyte-compatible type of the H series. It has the characteristic of being able to fill with high precision mainly according to various sizes of large batteries and large capacitors. It is a precision structure based on the conventional B series. It is also possible to support air drive.

  • By using a pulse motor drive for the drive unit of the Hiber pump, it is possible to operate at a stable speed from a low speed, and it is easy to reset the setting by quantifying each setting.
  • The separation of the drive and controller allows for control away from the working atmosphere and easy maintenance.
  • Stroke and speed settings can be made via a PC or an external control device (PLC).
  • It has characteristics that enable high-precision filling mainly according to various sizes of large batteries and large capacitors.
  • It has a precision structure based on the conventional B series.

 

Material of wetted parts

A. Pump head SUS316
B. Poppet PTFE, POM
C. O-ring EPDM, FKM, Silicone, CR, FFKM, Kalrez ®
D. Plunger PTFE, Polypropylene
E. Tube Polyethylene, PFA
F. Sleeve SUS316
G. Plunger Seal Outside: PTFE, UHMW
Inside: EPDM, FKM, Silicone, CR, FFKM, Kalrez ®

* Kalrez® is a trademark or registered of DuPont Corporation or its affiliates.

 

List of Models

MODEL (Model) Maximum discharge rate (cc)
4H1-C-W58DD ~57.2
4H2-C-W116DD ~114.4
4H3-C-W174DD ~171.6
4H4.5-C-W260DD ~261.5
5H3-C-W500DD ~542.6

All Products

H Series Electrolyte Compatible Type Wet Cup Specification [Motor Driven]

Fill out the form below, and we will be in touch shortly.

H Series Electrolyte Compatible Type Wet Cup Specification [Motor Driven]

Fill out the form below, and Download Catalogues.