Products

Level Sensor

The level sensor is used to check the remaining materials in the tank to act as a precaution to prevent the materials from being run out by using the signal. 2 types, electrostatic capacitance and photoelectric capacitance are available. Since both types can be used with the tube of the fluid level sensor as a set, the level sensor does not come into contact with the fluid, so it will not get dirty or break down easily.

Since the sensor can be fixed firmly with the top and bottom “grip”, it can be attached onto the predetermined position of the tube.
It can be set at several places as long as it is within the range of the tube length.
The attached position can be repositioned easily.

	Electrostatic	Photoelectric

Position Detection Accuracy	0.6～5.0mm	1 mm or less
Power Supply Voltage	DC12～24V	DC12～24V
Electric Current Consumption	12 mA or less	25 mA or less
Operation Mode	Output transistor is turned on when liquid level is detected	Light-on/dark-on switching
Output Form	NPN Transistor Open Collector
Control Output	Switching capacity: 100 mA or less, Residual voltage: 1 V or less
Connection Method	Only cable (Unprocessed cable tip) (Cable Length 2ｍ)