Products

Poppet Valve V10/V11 series

The dispenser valves, Poppet Valves are designed to dispense medium to high viscosity materials such as epoxies, silicone, oil, grease etc. The diaphragm (PTFE) is used for the top seal of the valve and this prevents the liquid from penetrating into the drive body. They also feature “suck back” anti-drip function by adjusting the adjusting knob to control drips of fluid between dispense cycles. The dispensing volume regulator dial makes it easy to fine-tune shot sizes up to precise deposits.

The pneumatic valve controller CV3 series is a suitable controller for the dispensing valve V10 series.

  • Since the PTFE diaphragm is used for upper seal, fluid does not infiltrate into the drive body.
  • Fluid dripping is prevented by the suck back function.
  • A trace volume dispensing can be done by the volume adjusting dial.
  • Since the needle adaptor of dispensing part is changeable to Rc1/8 or ¼ as an option, larger volume of dispensing can be done.

Epoxy, Silicone, Oil, Grease, UV Adhesive, Ink, Paint, etc.

Structure of the valve

The valve of the V10 valve is poppet shaped and is closed when the poppet is pushed into the valve seat by the force of a spring.
Air pressure is sent from the top to push the piston, opening the valve and allowing the material to flow.

Working air pressure 0.34MPa or higher
Material pressure MAX 0.69MPa
Minimum discharge 0.005cc
flow rate 2556ccm
Maximum number of responses 200 times/min
Piping connection diameter
Pneumatic IN M5 or dedicated coupler
Material IN
V10/V10U:Rc1/8
V11/V11U:Rc1/4
Material OUT Needle adapter or Rc1/8 or Rc1/4
Material of wetted parts
Diaphragm PTFE
poppet
V10/V11:PTFE
V10U/V11U: Urethane
Seal body SUS316
weight 245g

 

All Products

Poppet Valve V10/V11 series

Fill out the form below, and we will be in touch shortly.

Poppet Valve V10/V11 series

Fill out the form below, and Download Catalogues.