Products

Solenoid Valve V40, V50 series

The dispenser valves, Solenoid Valves are ideal for dispensing low viscosity materials such as solvents by low pressurizing. Since it is a solenoid valve, it controls the “open/close” of the valve by the electrical signal from the controller to dispense the programmed volume of the liqud. The part of the valve making contact with the fluid being dispensed can be piped by using materials such as resin or PTFE depending on the contents of the fluid. Since this dispenser valve is lightweight and compact, it is also suitable for integrating onto automated machines

The valve controller CV1 series is a suitable controller for the dispensing valve V40 series.

  • PTFE made solenoid valve can dispense low viscosity fluid such as solvent from a trace volume.
  • Connector, tube and needle can be connected by plastic and PTFE depending on the fluid.
  • Multiple dispensing system can be easily integrated since it is light and compact.
  • Low viscosity fluid such as Organic Solvents, Acids, Reagents, Oils, Resists, etc.

Structure of the valve

The V40/50 valve regulates the material flow on and off by opening and closing the PTFE diaphragm in the middle of the flow path by signaling to the solenoid.

V40 V50/V50-S
Operating voltage DC24V
Piping connection diameter M6
Working pressure MAX 0.15MPa MAX 0.39MPa
Orifice Φ1.2 Φ1.6
Minimum discharge 0.01cc 0.03cc
flow rate 528ccm 720ccm
Material of wetted parts
Diaphragm PTFE (common)
Seal body
V40/V50:PTFE/PCTFE
V50-S:SUS304
Weight 60g V50 110g V50S 140g

All Products

Solenoid Valve V40, V50 series

Fill out the form below, and we will be in touch shortly.

Solenoid Valve V40, V50 series

Fill out the form below, and Download Catalogues.