Products

Valve Controller CV1

The electromagnetic valve controller CV1 series is designed to be used for solenoid valves (V40 and V50) for effective liquid dispensing. It is equipped with a circuit to maintain the dispensing input signal. The signal output is provided as a standard function.

Complete protection from staining of adhesives is ensured with the use of stainless steel chassis.

The dispensing can be checked by pressing the test switch on the panel.
It is possible to obtain timer settings which are stable and have good setting reproducibility by using a 0.001 second digital quartz timer.

The set time can be checked on the timer display and the dispensing time can be measured using the stop watch function in the free mode. (When the timer is exceeds the maximum time, counting begins again from “0”.

Control System Electronic Control
Power Source AC100V ±10% 50/60Hz
Power Consumption 7VA and below
Timer 0.001 ~ 9.999sec (digital setting)
Operating Ability 400 times / minute
External Dimensions 180 (W) × 170 (D) × 81 (H) mm
Weight 1.9kg
Note AC200V, AC220V, AC240V are also available

All Products

Valve Controller CV1

Fill out the form below, and we will be in touch shortly.

Valve Controller CV1

Fill out the form below, and Download Catalogues.