Products

H Series Air Drive Controller CV4

Valve controller is a system controller that controls valves, pumps, temperature, etc.
It is equipped with a discharge input signal holding circuit and a discharge end signal output as standard. In addition, the use of a stainless steel chassis ensures thorough measures against dirt such as adhesives.

CV series [CV4] is a pneumatic double-acting valve and pump controller.
Applicable valves: V30, V31, V300, PM500 series, Hibar pumps

  • You can check the discharge by pressing the test switch on the panel.
  • By adopting a 0.01 second digital quartz timer, setting repeatability is good and stable discharge time can be obtained.
  • By equipping the test switch, the dispenser alone can check the discharge even when it is incorporated into a dedicated machine.
  • The timer range can be easily changed by internal switch. (0.01~9.99sec.)
  • Highly accurate pressure setting is possible for stable pump operation.
Control Method Pneumatic – Electronic Control
Power AC100V ±10% 50/60Hz
Power Consumption 7VA or less
Timer 0.01 ~ 9.99 sec (Digital Setting)
Pressure Adjusting Range 0.01 ~ 0.7MPa
Maximum Shots 400 shots/min
External Dimensions 180 (W) x 170 (D) x 81 (H) mm
Weight 1.9kg
Note AC200V, AC220V, AC240V are also available

All Products

H Series Air Drive Controller CV4

Fill out the form below, and we will be in touch shortly.

H Series Air Drive Controller CV4

Fill out the form below, and Download Catalogues.